14/10/08 – ARBURG presents all facets of its innovative injection moulding technology with ten exhibits at the Fakuma show in Friedrichshafen from 14th to 18th October 2008.

ARBURG will present all facets of our innovative injection moulding technology with ten exhibits at the Fakuma show in Friedrichshafen from 14th to 18th October 2008. The main focus of our stand will be energy efficient injection moulding production and innovations in the field of robotic systems.

16.06.2008 – "The Proform premiere went very well for us. The quality of dicussions was very high since this exhibition is being attended by trade visitors only", concludes Eberhard Lutz, ARBURG Director Sales Germany. "Through the consolidation of two branches we were able to make new contacts at Proform. Therefore this new trade fair vey well complements our activities in North Rhine-Westphalia and Northern Germany."

03/06/2008 – ARBURG impressively demonstrates the high performance of its injection moulding machines and its expertise in the field of plastic/metal combinations at the very first Proform trade fair, to be held in Dortmund from 10 to 13 June 2008.

21/05/2008 – At the Chemexpo, which is taking place this year in Budapest from 27 to 30 May, ARBURG exhibits as representative of its entire machine range one of the large ALLROUNDER machines on Stand 4 / B in Hall B.

21/05/2008 – At this year’s Plastpol, which takes place in Kielce in Poland from 27 to 30 May, ARBURG demonstrates three exhibits on its representative stand B 30 in Hall B.

From 20 to 23 May 2008, ARBURG presents a high-speed thin-walled application at the International Engineering Exhibition 2008 in Nitra, Slovakia.

ARBURGs participation at the Chinaplas was an allround success. With four machine’s on demonstration, the trade visitors could gather valuable information on the ARBURG machine series. A broad spread of applications was impressively demonstrated by the performance and flexibility of the ALLROUNDER machines.

The new ARBURG subsidiary in Mexico presented itself for the first time to a bigger audience at Plastimagen, held from April 8 to 11.

Customers from all over the world bring technology and application highlights to Lossburg.

07/04/2008 – The world of plastics has come together at ARBURG: with more than 4,100 visitors, this event has exceeded all expectations.

ARBURG will be exhibiting at the Chinaplas in Shanghai from 17 to 21 April 2008. On exhibition stand no. G21 in Hall E1, trade visitors will be impressed by the performance and versatility of the ARBURG machines, as demonstrated by the four exhibits. An electric ALLROUNDER 420 A, a hydraulic ALLROUNDER 320 S, a hydraulic ALLROUNDER 420 C GOLDEN EDITION and the ALLROUNDER 275 vertical machine will be presented. The wide range of applications includes the medical technology, optics and automotive sectors as well as the encapsulation of inserts.

ARBURG will present itself in two senses of the word at the Plastimagen, which will be held in Mexico City from 8 to 11 April 2008. On the one hand, ARBURG’s new Mexico subsidiary will celebrate its debut. On the other, trade visitors will be able to gain an impression of the high performance of ARBURG’s products. At the ARBURG exhibition stand, No. 300, a hydraulic ALLROUNDER 470 C GOLDEN EDITON will produce a moulded part for the medical technology sector.

On 21 February 2008, ARBURG opened its new American Technology Center California in Irvine, CA, in the presence of ARBURG’s Managing Partners, Juliane and Michael Hehl.

25/02/2008 – Take the unique opportunity to find out more about the latest developments in technology and trends within the injection moulding industry at the Technology Days in Lossburg from 3th to 5th April 2008.

In the new DOWNLOAD section you can directly find on the national website all available ARBURG brochures on products, application technologies, services and the company itself.

On their premiere of the first Swiss plastics fair, “Swiss Plastics”, at the Lucerne Allmend Exhibition Centre from 15 to 17 January 2008, ARBURG exhibited an ALLROUNDER 420 A 1000-400. The representative of the electric ALLDRIVE series successfully demonstrated its advantages in the field of high-speed applications. The response of the trade visitors to the ARBURG stand presentation was thoroughly positive.

Since 1 January 2008, ARBURG has been represented in Mexico by its own subsidiary – ARBURG S.A. de C.V. – thus giving due recognition to the enormous potential of the Mexican market. This move is partly the result of the increased presence of international global players who are stepping up their production in Mexico, as well as the ever-higher quality demands made by the Mexican customers.

The new premises of the ARBURG subsidiary in Shanghai were officially opened during an inaugural celebration held on 6 December 2007. As a representative of the ARBURG parent company, Helmut Heinson, Managing Director Sales, welcomed some 150 guests.

Large celebrations were held on 5 and 6 December 2007 at ARBURG’s Danish subsidiary.On the first day, ARBURG Partners Eugen, Juliane and Michael Hehl were in Greve, with numerous invited guests in attendance, in order to officially open the new premises and to congratulate Subsidiary Manager Eddie Oswald and his team on the ten-year anniversary of ARBURG’s Danish subsidiary.The following day, numerous visitors attended the open day in order to see the new premises at Greve.

On the occasion of the world trade fair K 2007, which took place from 24 to 31 October in Düsseldorf, ARBURG has launched new products.

24/10/2007 – Plastic world meets at K in Düsseldorf / Germany: From 24 to 31 October ARBURG presents in hall 13, stand A 13, new products.

22/10/2007 – By cooperation of IB STEINER and ARBURG, the new technology EXJECTION is now available for ALLROUNDERs.

On October 4, 2007, ARBURG opened its new Technology Center Midwest.

Das zehnjährige Jubiläum der Partnerschaft von ARBURG und seinem slowenischen Handelspartner TERA war der Anlass, zweitägige Technologie-Tage bei TERA durchzuführen. TERA Geschäftsführer Marjan Leban konnte mehr als 50 Besucher an beiden Tagen zu einem informativen und abwechslungsreichen Programm begrüßen.

Transtech, ARBURG’s trading partner in Russia since 2001, celebrated the inauguration of its newly-occupied business premises on 27 and 28 September in an extremely pleasant atmosphere. Some 100 guests from all over Russia and Belarus

On 1 July, the newly sealed partnership between ARBURG and Edstachem (M) Sdn Bhd was made official: The Malaysia-based holding company will assume comprehensive sales and service activities for the Lossburg injection moulding machine manufacturer via its two subsidiaries in Vietnam. ARBURG is extremely pleased about the conclusion of this contract as Vietnam is a highly interesting, albeit demanding market to develop.

On 14 and 15 June, ARBURG celebrated the 25th anniversary of the ARBURG Technology Center (ATC) in Radevormwald (Germany). 341 invited guests congratulated on the silver anniversary and celebrated this in the context of the anniversary in-house exhibition.

Eine Woche nach der Chinaplas 2007 ist man bei ARBURG sehr erfreut über den positiven Verlauf. Die Resonanz aller Fachbesucher, die den ARBURG Messestand besuchten, war durchweg positiv. Mit allen vier Exponaten wurde die Leistungsfähigkeit der hydraulischen und elektrischen ALLROUNDER eindrucksvoll unter Beweis gestellt. Absolutes Highlight war erneut die Becher-Anwendung: Auf einem elektrischen  ALLROUNDER 420 A wurden in 2,2 Sekunden Zykluszeit in Zweifach-Kavität Becher produziert.

In recognition of their life’s work and their outstanding services to the plastics industry, the American Society of Plastics Engineers (SPE) has awarded the Business Management Award for 2007 to the two ARBURG Managing Partners Eugen and Karl Hehl. The prize-giving took place on 6 May during an evening reception, at the Millennium Hotel in Cincinnati/Ohio, which was held on the occasion of the SPE Annual Technical Conference (ANTEC).

In 2007, ARBURG will once again be present with added exhibition space at the Chinaplas. From 21 to 24 May, four ALLROUNDERs will be exhibited at the company’s 186-square-metre exhibition stand. ARBURG will be presenting the new Allrounder 275 V vertical machine for the first time outside Germany at stand 1B322.

The Brasilplast was very successful for ARBURG. The feedback of the 3.500 visitors, which visited the ARBURG stand, was overwhelmingly positive. With the two exhibits, ARBURG impressively demonstrated the performance of the hydraulic and electric ALLROUNDER machines in the packaging sector. On the hydraulic ALLROUNDER 570 C GOLDEN EDITION, 24 screw caps were injection-moulded. The application from the field of in-mould labelling (IML) was an absolute highlight: On an electric ALLROUNDER 570 A, which was equipped with peripherals from Wittmann and a four-cavity mould, 300-millilitre cups were produced. The overall cycle time was of 4.8 seconds, including insertion of the film.

On 28 March 2007, the official ground-breaking ceremony for the new ARBURG Customer Centre was held in Lossburg. At the heart of the new building will be a show room, which offers sufficient space to house the entire machine series. “With this new building, we confirm our strong commitment to Lossburg as our sole production location,” said Michael Hehl, Managing Partner and Spokesperson for the ARBURG Management Team in his welcoming speech.

22/03/2007 – Technology Days at ARBURG and the international plastics sector follows ARBURG's invitation. More than 3,600 registered visitors from all over the world, including Indonesia, North America and Brazil, have the exclusive chance of gaining a comprehensive impression of ARBURG's products and service.

07/02/2007 – Take the unique opportunity to find out more about the latest developments in technology and trends within the injection moulding industry at the Technology Days in Lossburg from 22 to 24 March 2007.

At the Interplastica 2007, which will be held from 30 January to 2 February in Moscow, ARBURG will be represented in the Forum Hall, Stand number FC 41, with two machines demonstrating how sophisticated technical parts and processes can be efficiently implemented in operational practice using ALLROUNDER machine technology. A high-speed application for producing a thin-wall part will be run on an electric ALLROUNDER 320 A 600-170 and a conventional insert will be produced on a hydraulic ALLROUNDER 175 V 125-70.

15/01/07 - With the start of 2007, ARBURG has changed its current representative office in Indonesia into an independent subsidiary. This step represents a strategic response to ongoing market growth in the region. The new subsidiary manager is Christianto Adisuhanto, who has been with ARBURG since 2002 and who previously managed the representative office.

22/12/06 - “Allrounder International” is the new annual slogan for the K trade fair 2007. The slogan is emblematic of the commitment behind the high-tech services of ARBURG, a global player with strong regional ties. Allrounder refers not only to ARBURG’s machines, but also to the worldwide activities of its highly qualified staff. The slogan “Allrounder International” thus carries the appropriate message of competence in terms of both machine technology and individuals, in all languages and in all markets.